Pages

What is Vintage Sewing?

Vintage Sewing is the best description I could think of to describe the way I work, for a number of reasons:-

I have never owned an electric sewing machine 

And apart from about ten terrifying minutes at school in the 1960s, I have never used one. Therefore I make everything using vintage sewing machines.  In recent years I have accumulated a few machines, and have done my best to put them to good use.


1949 Singer 15K


My newest machine (in both senses, being my my most recent purchase and the most recently manufactured) is a 1949 Singer 15K hand machine.


1945 Singer 15K


For free motion quilting I use my 1945 Singer 15K treadle, which features on miniature videos on blog posts and also on Youtube

1936 Singer 201K


When using attachments such as the ruffler or the buttonholer I like to use my 1936 201K treadle.

I want to show that old sewing machines are easy to clean up and use

In 2011 my husband and I set up a Youtube channelstarting with a couple of videos showing how to thread the machine that I had learnt to sew on, an 1897 Singer 28K.  Our son said nobody would be interested.  He now cheerfully acknowledges that he was well wide of the mark.


Vesta Transverse Shuttle

Just for fun, here is a video of my prettiest machine a Vesta Transverse Shuttle dating from about 1936, with music specially composed by our son.  He recorded the sound of one of my machines stitching to use as the basic rhythm, and composed a theme around it.







I prefer to use natural fibres and fabrics

For clothes I like cotton poplin prints.  For quilts, the more I do free motion quilting, the more I enjoy using the plain strong colours and shot cottons from Oakshott.  I tend not to use prints that are up to the minute hot and trendy because they can date a piece of work to within five years or so.  

Somehow I think that using vintage machines with carefully chosen fabric, the finished work can take on a timeless quality.  At least, that's what I like to tell myself.

The way I work is firmly rooted in the past

To explain this, it is perhaps easier to list the things I lack or never use to highlight the limits within which I work:-

Using vintage machines with straight stitch only, I have no zigzag, no backstitching, no overlocking (or serging, as it is known to Americans).

I have no studio or design wall - I use the dining room table and clear things away afterwards when we need to eat.  The settee doubles up as a design wall.  I would use the floor, but it's too mucky.

The grandly named sewing room is in fact a corner of the dining room.

Lack of space means I have to use the quilt as you go method, doing all the stitching by machine. 

I use no glue, spray cans (starch, glue etc), fabric markers, iron-on interfacing, non-woven interfacing, synthetic threads etc. etc - all the sort of products I see recommended in books and magazines, online, in shops and just about everywhere.  My reasoning is that if people could make fabulous clothes and quilts, say, in the 1930s, with just straight stitch machines and plenty of practice and knowhow, then so can I.

Fortunately, I was well taught at school back in the late 1960s and early 1970s.  I learnt how to do French seamsfelled seamsbound seams and other similar techniques, so it is second nature when making clothes to leave no raw edges in sight.

Quilting is a more recent adventure

Thanks to all the inspiration and information on the internet I have branched out from making clothes to making quilts as well.

To learn piecing techniques, I spent hours poring over Bonnie Hunter's free scrap quilt patterns on Quiltville.  Bonnie, in turn, when she started piecing on a treadle, found one of my Youtube videos helpful and featured it on her blog.   

After learning the basics of piecing, I decided to try appliqué.

Appliqué was a challenge, but I worked out how to do it using the sewing machine.  First I make a paper stencil from the pattern, then with the machine I follow the lines of the stencil to stitch the material to be applied to the background material, and only at the end do I actually cut out the shape as I stitch around it by hand in blanket stitch.  For want of a better name, I called this method Vintage Sewing Machine Appliqué, and if you click on the heading on the sidebar you will find posts showing how I add stitched decoration with the machine, and how I quilt around it. 

My methods paid off when I entered my Queen's Diamond Jubilee Quilt into the quilt show at Malvern in 2013 and gained my first ever ribbon.



I was delighted at being awarded a Judges' Merit.

Since then I have been working hard at free motion quilting, having initially taken the cue to get started form Leah Day's videos, and this wonderful lady on Youtube.





Leah gave the guidance for the hands, and this lady showed the foot action.  I shall be forever grateful to Leah and the Laga Lady.

My hope now is that by blogging and posting the occasional video on Youtube I can pass on ideas, techniques and inspiration.



37 comments:

  1. I just in the past week bought a vintage Singer sewing machine. It also is a 1936 model, though it is electric. I enjoy your reading your blog

    ReplyDelete
    Replies
    1. Congratulations on your new machine, Joyce! I am sure you will have hours of pleasure with it.

      Love, Muv

      Delete
  2. Hi Lizzie, bought my very first sewing machine this week, a 1909 Singer 66. Model!!! Thank The Lord for your "how to treadle" tutorial!!!!!

    ReplyDelete
    Replies
    1. Great news, Karen. Have fun with your machine!

      Delete
  3. I bought a Vesta hand crank machine at Ardingly. What's the best way to find out how old it is? It came with lots of bits and bobs -- and a complicated bobbin winder I can't figure out. Where's a good source for a manual? Love the video.

    ReplyDelete
    Replies
    1. Hello Unknown,

      Your best bet is to look at NeedleBar to find out all about the history of Vesta machines. It may be worth trying Helen Howes for a manual. Here are the links:-

      http://needlebar.org/

      http://helenhowes-sewingmachines.co.uk/

      As for bobbin winders, click on the heading Bobbin Winders on the sidebar on this blog and you will find several posts about German bobbin winders, so I expect you should be able to work out how your machine's winder works.

      Best of luck!

      Love, Muv

      Delete
  4. could you advise where you got the feet for your vintage machine. I am having difficulty finding any.

    ReplyDelete
    Replies
    1. Hello Scrappy. Try here:-

      http://helenhowes-sewingmachines.co.uk/feetlinks.html

      Delete
  5. Your story is fascinating. No frills, just like it used to be. And a whole collection of beautiful machines. You're keeping the history of sewing and quilting alive. Perhaps a book in the future?

    ReplyDelete
    Replies
    1. Thank you Monica!

      A book... now there's an idea.

      Delete
    2. I would buy it! :) I have a wide variety of machines, and funny enough, the newest ones give me the most trouble. I just made my girls (and their dolls) matching aprons using my New Home treadle. It was a bit entertaining at times, but so much fun! I much prefer it to the motorized ones!

      Delete
  6. I am so excited to have just found your site. I have a Singer 201k hand crank 1936 which was a Christmas present last year. I have cleaned and oiled it and made a few small items. It works really well considering the age and how rusty/dirty it was when I got it. I look forward to reading your blog and learning more about vintage sewing

    ReplyDelete
    Replies
    1. It sounds like a great machine, Sue. Enjoy the blog!

      Delete
  7. Love your tutorials but since I am new at sewing, especially on vintage machine could you tell me if its possible to make a reverse stitch,like a safety stitch, on a vintage sewing machine. Its a singer 87 years old..thank you in advance..

    ReplyDelete
    Replies
    1. Hello Stanka,
      Few old machines do a reverse stitch. I have only seen it on some German machines and a Vickers, and not on Singers. I have lived without reverse all my sewing life. You really don't need it. Just turn the work round and go back the way you came.
      Love, Muv

      Delete
  8. Hi Muv,

    Thanks for all your videos on youtube and your clear blog posts about how to shape up an old machine! My sister had bought a $250 machine last year that stopped working just after warranty ran out, and we were told at the local repair shop that it would be $179 to send it in for repairs! Suffice it to say, we brought the family's 1920 Singer 127 out from the garage and finally decided to get it into working order instead! :)

    I'll be the first one since my grandmother to use a non-electric machine, but I'm looking forward to getting used to the treadle and learning about its inner workings. You're a great resource to that end!

    Now I'm off to get some metal polish and sewing machine oil so I can try and slide the rusted needle plates off our machine. :)

    Thanks again,
    Carly

    ReplyDelete
    Replies
    1. Hello Carly,

      You have hours of fun ahead of you! Aren't you glad you never got rid of that old machine? Nothing beats the satisfaction of making items with a machine you have restored yourself.

      Love, Muv

      Delete
    2. Yes, it's quite lucky my one sister hates to get rid of old things, otherwise it may have been sold in a garage sale several years back! There's some crackling of the japanning and a few rust spots, but after managing to slide the needle plates off and finding the bobbin and bobbin case inside, I'm feeling a bit more optimistic about this project. I think the only parts I'll need to replace will be the leather belt and maybe the tension spring.

      Thanks again!

      Delete
  9. Very much enjoy watching the videos. I have used your videos to learn to do a fair amount with my little 99K hand crank - the booklet seems to be a little too small for my eyesight even with specs! She was in perfect condition, just a little oiling. I now have a treadle and a 15K80 which needs a bit more of a brush up, but otherwise seems to be OK - I have already got the cleaning equipment at the ready! Also found Helen Howes to be invaluable - and funnily enough Leah Day was my first inspiration into machine quilting - hand sewing takes way too long!
    I may hold off the quilting on the treadle for a little while longer but you have certainly opened my eyes with the things you can do with these little old timers! So thank you. Kind regards

    ReplyDelete
    Replies
    1. Thank you so much, Kerry - great to hear from you, and every best wish for Christmas!
      Love, Muv

      Delete
  10. Greetings, I am retired and new to vintage sewing machines. My first one was a 1930 Vickers that had floated around in a flooded basement for a week, Thank goodness the bentwood top was airtight. The base fell apart and the thick oil film on the base preserved it. Everything else cleaned right up. It sews like a charm and anything that fits under the foot, I don't have it anymore, a close friend brought her plastic offshore thing over again for me to fix, it hurts too much to call it a sewing machine, being a single mother she can't afford anything so I gave her an "old" one I had. Showed her how to oil it etc. The second machine is a 1924 Singer 128, the third is a 1956 201K, the forth might be a Singer 191J possibly. really enjoyed your site.
    Robin

    ReplyDelete
    Replies
    1. Hello Robin

      A floating Vickers - now there's a miracle!

      I am so pleased that you have enjoyed reading the blog. These old machines are such an immense pleasure, worth every minute that you spend cleaning them up.

      Love, Muv

      Delete
  11. Oh Lizzie, please help I have my Grammys 1942 Singer K99 hand motion and thankfully found your clean up utube videos. My big problem now is tension....I have got it from loopy under to both sides even but material pucketing. Pleeeeeeese help as I too want to work only using this machine. All my sewing to date has been by hand. Love Angi

    ReplyDelete
    Replies
    1. Hello Angi,
      If there are no loops top or bottom then the tension is probably right. Puckering can be caused by the stitch length being too long. The finer the material, the shorter the stitch. Perhaps that is the problem.
      Love, Muv

      Delete
  12. Hello I need some guidance I have a 1889 singer machine given to me by my mom . When sewing it's missing the bobbin stitches in places and puckering like the thread is tight any help appreciated thanks

    ReplyDelete
    Replies
    1. Hello Anonymous,

      Without seeing the machine I can only make suggestions as to what the problems might be, but missed stitches can be a sign that the needle is blunt, and tight thread could mean that the stitch length is too long.

      Hope this helps, and sorry for the delay
      Love, Muv

      Delete
  13. Hi just been given a serata vibrating shuttle sewing machine. Got it sewing using the original manual but I'm clearly doing something wrong as it looks ok on top but the stitches are a mess underneath.. any suggestions?

    ReplyDelete
    Replies
    1. Hello Mrs Mulberry,

      If you are absolutely sure you aren't making a mistake with the threading, and that the needle is set correctly, check the tension. Always check the top tension first. Loops on the back means that either the top tension is too loose, or the bottom tension is too tight.

      https://lizzielenard-vintagesewing.blogspot.com/2013/05/setting-needle.html

      https://lizzielenard-vintagesewing.blogspot.com/2012/06/how-to-adjust-tension-on-long-bobbin.html

      Good luck!

      Delete
  14. Greetings,
    I love your videos they have been a life saver! I have a 15-86 and would love to do free motion quilting however, I am not sure how to adjust the feed dogs, is it even possible?
    Thank in advance for any help you can offer!
    Leah from the US

    ReplyDelete
    Replies
    1. Hello Leah,

      Glad you have enjoyed the videos.

      If it is possible to drop the feed dogs on your machine, you need to look underneath - see this post:-

      http://lizzielenard-vintagesewing.blogspot.com/2013/05/dropping-feed-dogs-on-singer-201k.html

      My Singer 15 treadle does not have feed dogs that can be dropped, so I just set the stitch length to zero. Watch the video about FMQ here:-

      http://lizzielenard-vintagesewing.blogspot.com/2012/11/treadling-like-blazes.html

      Good luck!
      Muv

      Delete
  15. Hi Lizzie,
    Love your blogs. I got myself a Koehler
    Half size sewing machine Reliance".
    I am very sad, it does not stitch. There is no manual. Just an instruction
    For threading the shuttle.
    All the needle does is make indentations. I hope you don't mind me
    Asking you if you can help.
    Thank you lots in advance.
    JULIANE

    ReplyDelete
    Replies
    1. Hello Juliane,

      Glad to hear you have been enjoying the blog.

      Unfortunately I am not familiar with that model of machine. However, if it is a model that has a stop motion screw, it could be that it is in the position for disengaging the needle, and all you need to do is turn it until it is tight. If the stop motion screw is not functioning properly, here is a post that shows how to remove it to clean up the mechanism.

      http://lizzielenard-vintagesewing.blogspot.com/2013/09/removing-stop-motion-screw.html

      I hope this helps!

      All the best,
      Muv

      Delete
  16. Thank you Muv for your reply. Will try it out. Love your blogs and videos I am in awe of your knowledge. As to never using electric machines. And the stance
    On not using modern sewing aids like freezer paper etc. I cant afford that and think it iskind of cheating.
    It would be nice if you did a book.
    I am self taught sewist. Not very interested in school. Rather climbed trees. But did learn how to do button holes by hand. And sew neatly seams.
    Having children made interested. By buying coats in jumble sales and altering them into clothing for toddlers.
    Bought the 1st handcrank machine 10 yrs
    Ago because the electricity went in the
    Winter time in the rural place we lived.
    Love to read everything of the blogs.
    Kind regards Juliane

    ReplyDelete
  17. Hi Lizzie
    I have recently acquired a Vesta saxonia hand crank sewing machine, similar to the one you did a YouTube video on. Thanks to that video I have successfully threaded it and set the tension and it seems beautifully. The only problem I seem to encounter is the tension on the actual shuttle itself. The screw is really ropey now and Iv been looking for a new shuttle with little luck. Will any other shuttle fit this machine.

    Many thanks
    Lisa

    ReplyDelete
    Replies
    1. Hello Lisa,

      Congratulations on getting your machine sewing!

      Your best bet is to contact Helen Howes. Here is her page with shuttles. You may have a delay before she replies because she will be in hospital this month.

      http://helenhowes-sewingmachines.co.uk/shuttles.html

      http://helenhowes-sewingmachines.co.uk/

      Good luck!
      Muv

      Delete
  18. Hello Lizzie. I love your website and videos. I wish everything on the internet was so friendly and nice!

    I'm sixteen years old and I love sewing and vintage things and a few years ago my friends found an old singer sewing machine by the side of the road. They gave it to me and I cleaned lots of the brown, greesy grime off. It worked very well and I sewed many things with it including a hot water bottle cover which must have been very strenuous for the machine!

    I think it is a 99k from 1948/1949.


    A few months ago, however, it no longer worked reliably so I found your video on how to thread it and I adjusted the tension and it worked!

    Now though, its acting funny again and I spent almost all day yesterday (over 7 hours!) cleaning and oiling it in line with your videos and this afternoon it just worked for long enough to sew about 30 centimetres worth of seams but now I'm doing the topstitching it's acting funny and unthreading and the thread gets scrunched with a little thin wisp in the eye like the strands have been serparated. I also don't know if the tension is right because I don't know how far the tension screw should be for normal tension.

    I really don't know what to do and it's so frustrating because I've worked so hard to get it working! I don't have the manual so I can't look for instructions.

    I would appreciate any advice very much because I want to do sewing at the same time as my mum so we can sew together! : - >

    Love from Alexandra.

    ReplyDelete
    Replies
    1. Hello Alexandra,

      Congratulations on all your hard work with your machine. What a shame you now have a problem with it.

      First of all, go to the ISMACS site and download a manual for a Singer 66, which is the same as a 99, the only difference is the 66 has a wider base.
      http://ismacs.net/singer_sewing_machine_company/manuals/singer-sewing-machine-manuals.html

      If the thread is shredding in the needle, it could be a burr in the metal in the eye of the needle itself, or it is coming unfurled because you have the cotton reel upside down on the spool pin. Also, old machines can get temperamental with synthetic thread, so I always use cotton.

      I hope this helps. Good luck!

      Love, Muv

      Delete